CFL lights have gotten lots of exposure lately due to their cost-saving abilities and their environmentally friendly energy usage. Given that they use, on average, 80% less energy than a normal light bulb, they’re a much better option for cost and energy conscious homeowners. But there are many other reasons for making the switch over from standard incandescent bulbs to CFL lighting.
1. Reduce your carbon footprint. A single CFL bulb can reduce a half ton of CO2 over the light bulb’s life. That’s a huge environmental benefit and helps you cut your carbon footprint without almost any work involved.
2. A variety of shapes and sizes. At one time, it was difficult to find CFL bulbs that would match up to certain interior specifications. But now, CFL bulbs can be found that work with all types of lighting, including lamps, overhead lighting, track lighting, etc.
3. They’re higher quality. A common complaint when CFL bulbs were new to the market was that they didn’t have the soft light that incandescent bulbs provided. Nowadays, they offer CFLs with all different levels of brightness, including soft white, and many people have said that the quality exceeds that of a standard bulb.
4. They last longer. CFL bulbs typically burn for 10,000 hours – but they’ve been known to last up to 50,000 hours. Compare that to a typical incandescent light, which burns from 800 – 1,500 hours, and you can see why CFLs are an obvious choice.
CFLs are a great option for homeowners who are concerned about their environmental footprint and who want to cut down energy consumption. For more information about how CFL bulbs can improve your home’s energy efficiency, contact Handyman Matters at 1-866-FIX-MY-HOME or enter your zip code above to find a location in your area.
Doors tend to be used for years and years without getting much notice. And when they do get noticed, it’s usually during a period of renovation and they’re being considered for a paint job or replacement (to match an updated interior).
However, doors provide many benefits to your home and once they fail to provide basic functions, it’s time to consider whether you should keep them or possibly replace them.
Here are 4 signs to help you figure out if you need to repair your home’s front door.
1. They don’t keep out noise. A key function of a front door is to effectively block noise – or at least reduce it significantly. This is especially true if you live on a busy street or in a high-traffic area. If your front door isn’t keeping outdoor noise to a minimum, it may be time to consider a replacement.
2. You notice drafts underneath the door. Air coming underneath the door could tamper with your home’s overall climate. It’s also a tell-tale sign that your doors aren’t energy efficient. Newer model doors can help your home keep warm air inside during the winter months and hot air outside during the summer months. Often, you just need a door sweep or updated weather stripping.
3. When it rains, there’s water near the door. Make notes of when you see water seep through underneath the front door – that could mean that there are structural issues with the house. The main issue that arises out of a leaky front door is the potential for the wood frame around the door to rot, which could require a complete repair of the door and the frame.
4. There are broken locks, handles and hinges. If your door is older and has repairs that need to be made to the locks, handles and hinges, purchasing a replacement door should be worth considering – especially since the pros of a newer door model can far outweigh the costs of yearly repair and inefficient insulation.
These 4 tips can help you be aware of when it’s time to consider a door repair or replacement for your home.
For help with a door replacement, call Handyman Matters at 1-866-FIX-MY-HOME – we can help you figure out what type of door would work best for your home and take care of the installation. You can also enter your zip code above to find a Handyman Matters near you.
Installing a carpet can be a complex task if you aren’t familiar with the ins and outs of carpet installation. While it’s probably a pretty good idea to hire a contractor or handyman to complete the task – and make sure it’s done right – a lot of homeowners want to try it out for themselves. For those who do, these helpful tips will make the process of pulling up the old carpet a little bit easier.
Do remove moldings around the floor and doorways. This will help get out the old carpet before putting in the new ones.
Don’t forget to vacuum the carpet before pulling it up. It will rid the old carpet of any excess dust that you might breathe in while pulling it up.
Do cut the carpet into strips before you begin to pull it up. This will make it easier to pull out sections, rather than trying to pull it all up at once. Use a utility knife to quickly cut strips that are 18” – 24” wide for ease of use.
Don’t forget to make sure the floor is clean and dry and tackless strips are removed. This needs to be done before you begin rolling out the new carpet on the floor. This is also a good time to double check floorboards for any loose boards or errant nails that need to be hammered down.
Do lay down new tackless strips around the edge of the room. Refrain from laying them down in front of doorways, and leave a space of ½” between the walls and the strips. Make sure that the tacks face towards the wall.
Don’t forget to lay down the under-pad in strips over the tackless strips. Trim additional underlay along the inside of the tackless strip – you can use duck-tape to seal seams.
By following these simple do’s and dont’s, you’ll be ready to lay down your new carpet in no time. Remember, home DIY is usually fun and rewarding, but sometimes you may need some additional assistance. The expert craftsmen at Handyman Matters can always help you replace and lay down new carpet. Call us today at 1-866-FIX-MY-HOME or enter your zip code above to schedule a phone consultation.