Call our local handyman office:
Overview
Our Services
Repair Vs. Replace
Common Problems
Service Areas
Our Process
Why Choose Us
FAQs
Detail banner image
Interior door installation in Greenville, SC.

Overview

Door Services in Greenville, SC

Ace Handyman Services Greenville handles door repair and installation for homes in Greenville, SC. One background-checked, multi-skilled craftsman can hang a prehung interior door, replace a worn entry slab, reset sagging hinges, or fit new weatherstripping and a threshold in a single visit. We work on interior, entry, storm, sliding, and closet doors for homes in Greenville and Simpsonville. The goal is a door that closes, latches, and seals properly, even when damp Upstate air swells the wood around the frame.

Our Services

Door Work for Every Opening in Your Home

Door trouble shows up in every room, from a bedroom slab that rubs the jamb to an entry door that no longer seals against humid air. Our craftsmen handle door installation, door repair, door replacement, and door painting for interior, entry, storm, sliding, and closet doors. Start with the opening that bothers you most, and we will sort out whether the slab, the hardware, or the frame is the real problem during the first visit.

INTERIOR DOORS

Hanging and Fitting Interior Doors

We hang prehung and slab interior doors, trim them to clear the flooring, and set hinges so the door swings freely and closes with a firm, quiet latch.

  • Prehung interior door installation
  • New slabs in existing frames
  • Trimming and bevel fitting
  • Bedroom, bath, and hallway doors
ENTRY DOORS

Entry Doors That Seal Out Weather

Entry door replacement covers new slabs and prehung units, with careful shimming, sealant at the sill, and weatherstripping that holds rain and humid air outside where they belong.

  • Front and back entry door replacement
  • Weatherstripping and door sweeps
  • Threshold adjustment or swap
  • Deadbolt and handle set fitting
STORM & SLIDING

Storm, Sliding, and Closet Doors

Storm doors, sliding patio doors, and closet doors each have their own tracks, closers, and sweeps, and we fit, adjust, or swap them so they run smoothly.

  • Storm door fitting and closers
  • Sliding door track and roller work
  • Bifold and closet door rehanging
  • Pocket door adjustments
REPAIR & FINISH

Fixing and Refinishing Worn Doors

Door repair resets hinges, strike plates, and latches, and door painting restores faded or chipped finishes with sealed edges so moisture stays out of the wood.

  • Sticking and binding door repair
  • Hinge, strike plate, and latch resets
  • Door painting and restaining
  • Sealing top and bottom edges

Wood doors absorb moisture through unsealed top and bottom edges, so we seal every cut edge before a door goes back on its hinges. If your local building department or HOA has rules about exterior door style or color, tell your craftsman when you schedule and we will work within them.

Our Full Range of Handyman Services

Appliances
Built-in Microwave Shelving
Washer & Dryer Setup
Clean Refrigerator Drip Pan & Condenser Coils
Install Window A/C Units
Bathroom
Replace Caulk, Grout & Tile
Install/Replace Shower Door
Hang Towel Racks, Mirrors & Accessories
Replace Mirror/Medicine Cabinet
Replace Subfloor
Carpentry
Build Shelving & Storage (Free-Standing or Built-In)
Repair or Replace Soffit Fascia
Molding: Crown, Base, Trim, Chair Rail & Exterior
Minor Framing Jobs
Install Wainscoting & Paneling
Masonry
Pour Concrete Pad or Steps
Powerwash/Crack Fill
Decks
Repair Steps
Repair Handrails
Powerwash & Seal/Paint
Repair or Replace Surface
Replace Joists
Build Covered Porch & Pergolas
Doors
Install Door Armor
Repair or Replace Doors
Weather Stripping/Adjust Operation
Replace Hardware
Refinish Stained Doors & Sidelights
Install Screen/Storm Doors
Drywall
Texture, Tape & Finish Drywall
Repair & Texture Drywall Holes
Add Walls & Closets
Flooring
Repair or Install Subfloor
Install Ceramic Tile, Slate, Wood & LVP
Replace, Upgrade, Repair, Paint & Stain Base Molding
Fence
Replace Posts
Repair Damaged Sections
Repair/Replace Gates
Gutters
Repair or Replace
Clean Out & Un-clog
Adjust/Add Downspouts for Proper Drainage
Handyman
Assemble/Move Furniture
Hang Pictures & Mirrors
Replace Hard-to-Reach Lightbulbs
Honey-Do Lists
Home Comfort & Efficiency
Install Insulation and/or Thermostat
Caulk Exterior Gaps
Insulate Crawl Space
Change Air Filters
Installation
Install Carbon Monoxide Detectors
Hook Up Stereo or Home Theater System
Replace Trim
Install Security System
Put Up & Take Down Holiday Lights
Seal Windows & Doors
Hang Flat Panel TV
Kitchen
Cabinet Hardware Upgrade
Install Countertops & Cabinet Doors
Add Backsplash
Repair Drawers
Refinish Cabinets
Caulk Countertops
Pets
Install Pet Door
Dog House Assembly
Catio Construction
Build Pet Enclosure/Dog Run
Safety
Child Proofing
Widen Doorways / Remove Trip Hazards
Install & Check Smoke & Carbon Monoxide Detectors
Senior Living Modifications
Install Hand Rails & Grab Bars
Install Special Fixtures: Knobs, Phone & Handles
Wheelchair Ramps / Widen Doorways
Non-Skid Flooring
Replace Door Knobs with Levers
Address Safety Concerns
Siding
Powerwash
Replace Trim
Install/Fix Shutters
Repair or Replace Wood, Vinyl, Composite, etc.
Storage
Build Storage Units & Closet Organizers
Install Attic Access Stairs
Replace Closet Doors
Tile
Remove & Replace Caulk and/or Grout
Floor Tile Repair or Replace
Install Tile in Bath, Kitchen, Foyer, etc.
Windows
Repair or Replace Windows / Eliminate Drafts
Install or Remove Screens or Storm Windows
Unstick & Wash Windows
Install Shutters & Hang Window Treatments
Winter
Ice Storm Damage Recovery
Winterize Vacant Homes/Businesses
Yard
Install Swing/Play Sets/Dog House
Check for Erosion/Bury Exposed Sprinkler or Wiring
Shed Assembly
Mow Lawn
Add Ground Cover
Paint
Interior Walls
Exterior Touch-Up
Sheds
Rooms
Repair Vs. Replace

Can This Door Be Saved or Does It Need Replacing?

Situation Recommendation Rationale
Interior door rubs the jamb in humid weather Repair Swelling from moisture is usually fixed by careful planing, sealing the bare edges, and adjusting hinges, so door repair keeps the original slab in service.
Hinge screws spin loose in the jamb Repair Glued wood dowels and longer screws restore a firm hinge hold, which stops sagging before the top corner starts scraping the floor.
Door will not latch against the strike plate Repair Resetting the strike plate and cleaning up its mortise fixes most latch complaints in one visit, with no need for door replacement.
Hollow-core door with a punched hole or cracked face Replace Patching a hollow-core skin rarely looks right, and a new slab costs little, so door replacement is the cleaner and longer-lasting answer.
Solid wood door with deep splits or rot at the bottom Replace Rot in the lower rail cannot hold a fastener or a finish, so a new door fitted to the existing frame is the sound fix.
Sound slab with a faded or chipped finish Refinish A sound slab only needs door painting or restaining, and when the casing looks tired too, interior and trim painting ties the room together.
Entry door warped so it no longer seals Replace Warping this severe lets in drafts and moisture that planing cannot correct, so a new entry door with fresh weatherstripping is the right move.
Rotted, split, or out-of-square jamb Replace When the jamb is soft or split, a new prehung door installation is the only way to get a lasting, square opening.
Common Problems

Why Doors Bind, Sag and Fail to Latch

Most door complaints trace back to a short list of causes, and the weather around here makes several of them worse. Humid summers swell wood slabs, heavy thunderstorms test every entry threshold, and years of daily use wear hinges and latches loose. These are the problems we fix most often and how we approach each one.

Doors That Swell and Stick

Humid summers push moisture into unsealed wood edges, so the slab swells and rubs the jamb. We plane only what is needed, seal the bare edges, and check that hinges are not the real culprit.

Sagging Hinges and Dragging Corners

Heavy slabs pull short screws out of soft jamb wood until the top corner scrapes the floor. We fill the screw holes with glued dowels, drive longer screws into the framing, and recheck the gap all around.

Latch Misses the Strike Plate

A door that will not latch usually means the slab dropped or the plate drifted out of line. We reset the strike plate, clean up the mortise, and adjust the hinges so the latch catches without a shoulder bump.

Drafts and Moisture at Entry Doors

Worn weatherstripping and a tired threshold let wind-driven rain and water intrusion reach the sill. We replace the seals along every edge, reset or swap the threshold, and test the closed door for light gaps.

Rolling and Sliding Door Trouble

Sliding and closet doors bind when tracks fill with debris or rollers wear flat. We clean and straighten the track, replace worn rollers or guides, and rehang the panel so it glides and stays on its rail.

Dented Walls Behind Door Swings

A missing door stop lets the handle punch dents into the wall behind the door. We set a proper stop and hide the damage with drywall patching and repair before the area is repainted.

Service Areas

Local Areas We Serve

Our Process

Door Projects Explained From Start to Finish

Every door project follows the same clear path from the first conversation to a follow-up after the work is finished, whether it is one sticking bedroom door or a full set of replacements. Here is how that path looks for door repair, door installation, and door replacement, so you know what to expect at each stage.

01

Initial Contact

We respond quickly to your request and set expectations for your door project from the first conversation.

02

Scheduling Your Appointment

We offer clear time options and confirm one specific appointment for your door work, never a vague window.

03

Job Preparation and Internal Handoff

Your door details are documented and shared with the assigned craftsman so the right tools and materials arrive.

04

Pre-Visit Confirmation

Your craftsman contacts you the day before to confirm the door details and avoid any surprises.

05

On-Time Arrival

Your craftsman arrives as scheduled and sends a text on the way to your home.

06

Professional Onsite Experience

Clear communication, respect for your home, and steady updates continue while we work on your doors.

07

Completion and Walkthrough

We test each door with you, review the finished work, and answer final questions before leaving.

08

Warranty Follow-Up

An 11-month follow-up call or email confirms your door work continues to meet your expectations.

Why Choose Us

Why Choose Our Greenville Door Service

Ace Handyman Services Greenville is family-run, locally owned, and operated, with background-checked W-2 craftsmen who are fully insured and part of the Ace Hardware family. One multi-skilled craftsman can often handle several repairs in a single visit, which helps when one door leads to another fix. We serve Greenville and Simpsonville homes with honest scope, a clean job site, and a one-year workmanship warranty. You deal with a local office that answers to neighbors, not a distant call center.

As America's Trusted Handyman, Ace Handyman Services Greenville delivers craftsman-level care across Greenville, SC. Tell us which doors stick or sag, then Schedule an Appointment Today for a time that works for you.

FAQs

Frequently Asked Questions

Q: Can you replace an interior door without replacing the frame?

A: Yes, as long as the existing jamb is square, solid, and free of rot. We remove the old slab, transfer the hinge and latch locations, and hang a new slab sized to the opening. If the frame is damaged or out of square, a prehung door installation is the better route.

A: Humid air and heavy summer rain push moisture into wood, and any unsealed edge swells until the slab binds against the jamb. We plane only what is needed, seal the bare edges, and check the hinges so the fix lasts when the weather turns again.

A: Yes. We fit storm doors to an existing frame, set the closer and sweep, and make sure the latch lines up. Many homeowners add one to shield a wood entry door from sun and driving rain.

A: Either way works. You can pick the door yourself, or we can help source a size that fits the opening. Billing is time and materials, meaning labor time plus the cost of the materials used.

A: A well-built interior door can outlast the house when its edges stay sealed, while hinges, latches, and weatherstripping wear out sooner. Exterior doors take more sun and moisture, so timely door repair, refinishing, and fresh seals extend their life.

A: Often yes for a quick refresh, but the best result comes from taking the slab down so every edge, including the top and bottom, gets sealed. Door painting on a hung door works when the finish is sound and only needs a clean, sanded, primed coat.

A: Yes. Our craftsmen serve homes in Simpsonville and Greenville, SC along with Mauldin, and the same process applies everywhere we work. Tell us the door type and the problem when you schedule so the right materials arrive.