Most drafty or sticking doors in Clayton homes need a repair, not a new door. A door that leaks air or won't latch usually has one of three problems: it's out of alignment, its seals are worn, or part of the door or frame is damaged. New weatherstripping, a door sweep and a hinge or strike plate adjustment fix most of them in one visit. Here's how to find the cause, and when to call our door repair team in Clayton.
What are the signs a door needs repair?
A door should close smoothly, latch without force and seal evenly on all sides. If you feel cold air, hear whistling or see light around the door, it's letting outside air in. Watch for these signs:
- Drafts at the bottom or sides
- A door that sticks at the top corner or rubs the threshold
- A latch that won't catch unless you lift or push hard
- A visible gap between the door and the weatherstripping
- Loose hinges or squeaky movement
How do you find what's causing the problem?
Most door problems fall into one of three groups. A quick look usually tells you which one you have.
- Alignment. Look at the gap around the closed door, called the reveal. If it's wider in some spots than others, the cause is often a sagging hinge, loose screws or minor frame movement.
- Sealing. Worn weatherstripping, a flattened door sweep or a threshold that sits too low lets in air and bugs.
- Damage. A rotted jamb, split trim or a warped door slab needs carpentry repair or replacement. New seals won't hold on wood that's soft or out of shape.
Clayton's humidity plays a part too. Wood doors swell and shrink with the seasons, so a door that fits in January can bind in July. Older homes in downtown Clayton often have original wood doors that have been through decades of that movement.
Which door repairs make the biggest difference?
These are the highest-impact fixes a handyman can usually finish in one visit:
- Replace the door sweep. This stops drafts and water from coming in under the door.
- Replace the weatherstripping. Fresh seals close the gap around the door and cut down on noise.
- Reinforce the hinges. Swapping short screws for longer ones that reach the framing corrects sag.
- Adjust the strike plate. The door latches securely, and you won't need to slam it.
- Adjust or replace the threshold. This closes the gap at the bottom while the door still swings freely.
- Recaulk around the frame. Fresh caulk seals gaps where the trim meets the siding or brick.
"We had several items to complete such as cleaning and recaulking bathtubs, filling in some holes and replacing weather stripping and swollen wood pieces. He was on time, walked through everything he was going to do, efficient and work was done correctly!" — Danielle S., Google review
Do interior doors have the same problems?
Usually, yes. Interior doors that stick or won't latch tend to come down to the same hinge screws and strike plate adjustments, without the seals. Cabinet doors that rub have the same fixes: kitchen cabinet and drawer repairs.
When should you call a pro?
Call us if the door is hard to operate, you see moisture damage at the bottom of the frame, or an exterior door isn't locking securely. Careful alignment and sealing keep the door secure and stop the same problem from coming back.
A draft can also come from somewhere other than the door. While a craftsman is at your home, ask about drafty windows and attic ladders and hatches, two other common sources.
"They repaired my back door for me this time. Installers always show up right on time. My wife and I work full time so it’s important to us that things get done quickly the first time. I really appreciate that these guys take on whatever task we throw at them no matter how small." — Shawn D., Garner, Google review
When is it time to replace the door?
Replacement makes sense when the slab is warped or cracked, rot has spread through the frame, or the door still leaks after new seals and adjustments. If you're not sure, we can look at it and tell you which way to go.
"Ace Handyman is great company. I have used them for multiple projects around my house to include drywall repairs, door repairs and replacements, and attic stair replacement. They are very responsive and always do a great job. I would highly recommend." — Lyle M., Garner, Google review
How much does door repair cost in Clayton?
It depends on what the door needs, which is why we don't publish a price. We bill by time and materials, so a new sweep costs far less than a frame repair. Call us and describe what you're seeing, and we'll talk through the scope before anyone arrives.
Who will come to my house?
Every Ace Handyman Services craftsman is a background-checked, insured W-2 employee (not a subcontractor). Before your appointment, you'll get an on-my-way text with your craftsman's name and photo. All of our work is backed by a one-year workmanship warranty.
We serve homeowners across Clayton, Garner, Knightdale, Smithfield, Selma and Wendell.
Frequently asked questions
How long does door weatherstripping last?
Many weatherstripping materials last 5 to 10 years, but heavy traffic and sun exposure can shorten that. If it is brittle, flattened or missing sections, replace it.
Will weatherstripping keep insects out too?
It helps. A tight seal reduces insect entry at the bottom and sides of the door, especially when it's paired with a good door sweep.
Why does my door latch stop catching after winter?
Seasonal movement can shift the door frame slightly. A small hinge or strike plate adjustment usually fixes it.
Is it better to repair a door or replace it?
Repair is usually the better choice when the problem is sagging hinges or worn seals. If the slab is warped or the frame has rotted past repair, replacement may be best.
Can you fix multiple doors in one visit?
Yes. If several doors have similar problems, doing them together saves time and keeps the look consistent. Tell us your full list when you call, and we will plan enough time.
Get your door fixed: call (919) 296-3748
If repairs won't do it, here's what front door replacement involves. For everything else, call Ace Handyman Services Clayton at (919) 296-3748 or request an estimate.